DSHP
HALF-PITCH DIP SWITCHES |
|
|
ADD TO INQUIRY BASKET |
DSHP SERIES FEATURES |
- Hyper-miniature DIP Switch,
surface mount device base on a 1.27mm pitch.
- Lowest contact resistance less
than 50m.
- Twin points and gold-plated
contacts, reliable design.
- All materials are UL 94V-0
grade, high temperature resistance plastic.
|
DSHP SERIES DIMENSIONS |
Gold
/ Gold Plated
G Type P/N |
Gold
/ Tin Plated
S Type P/N |
Unit |
mm |
inch |
DSHP02TSG |
DSHP02TSS |
4.12 |
0.16 |
DSHP04TSG |
DSHP04TSS |
6.66 |
0.26 |
DSHP06TSG |
DSHP06TSS |
9.20 |
0.36 |
DSHP08TSG |
DSHP08TSS |
11.74 |
0.46 |
DSHP10TSG |
DSHP10TSS |
14.28 |
0.56 |
DSHP12TSG |
DSHP12TSS |
16.82 |
0.66 |
|
DSHP
SERIES MATERIALS |
Part
Name |
Material |
Finish |
Base |
PPS UL94-V0 |
Black |
Cover |
PPS UL94-V0 |
Black |
Actuator |
Nylon UL94-V0 |
White |
Moveable |
Beryllium |
Gold / Tin |
Terminal Contact |
Brass |
Gold / Tin |
Terminal |
Brass |
Gold / Tin |
|
DSHP SERIES RATINGS |
|
Contact Rating |
|
|
Switching |
: 25 mA at 24 VDC |
|
Non-Switching |
: 100 mA at 50 VDC |
|
Contact Resistance |
|
|
Initial |
: 50 mOhm Max |
|
After life |
: 100 mOhm Max |
|
Insulation Resistance |
: 100 MOhm Min,
60 sec at 100 VDC |
|
Dielectric Strength |
: 300 VAC for 60
sec |
|
Switch Capacitance |
: 5 pF Max at 1 MHz |
|
Operation Temperature |
: -30 to +85 deg C |
|
Storage Temperature |
: -40 to +85 deg C |
|
DSHP SERIES MECHANICAL & PROCESSING |
|
Operational Force |
: 500 gf Max |
|
Mechanical Life |
: 1000 cycles |
|
Resistance to Soldering |
: 270 +/- 5 deg C for 10
seconds |
|
DSHP SERIES SWITCH OPERATION & TAPING |
- Use tweezers or ball point pen for switch operation.
- Flux cleaning should be done without removing the tape.
- If the tape is removed, the residual adherence is than
prior to tape removal, possibly causing flux inflow.
- Sealed switches are water, detergent, and isopropyl
alcohol resistant.
|
DSHP SERIES
ENVIRONMENTAL TESTING |
Cold:
Switches under temperature at -40 +/- 2 deg C for 96
hours.
Dry Heat:
Switches under temperature at 85 +/- 2 deg C for 96 hours.
Humidity:
Per MIL-STD-202F, Method 103B, Test Condition B
There shall be no evidence of corrosion and the insulation
resistance shall be no less than 100 megaohms.
Vibration:
Per MIL-STD-202F, Method 204D, Test Condition A
There shall be no opening of closed contacts or closing of
open contacts in excess of 10 microseconds.
Shock:
Per MIL-STD-202F, Method 2213B, Test Condition A
There shall be no opening of closed contacts or closing of
open contacts in excess of 10 microseconds.
Thermal
Shock:
Per MIL-STD-202F, Method 107G, Test Condition A
There shall be no evidence of physical damage or permanent
change in electrical characteristics
Salt-Spray:
Per MIL-STD-202F, Method 101D, Test Condition B
Under 35 +/- 2 deg C and 5 +/- 1% salt-water concentration for
48 +/- 1 hours.
|
DSHP SERIES
PACKING SPECIFICATIONS |
- All DIP Switches are shipped in Standard IC
Tubes or Reel Package, with all poles "OFF".
Package |
Pole |
2 |
4 |
6 |
8 |
10 |
12 |
Reel |
Qty/Reel |
2,000 |
2,000 |
2,000 |
2,000 |
2,000 |
2,000 |
|
DSHP
SERIES SPECIFICATION PDF |
|