DSPV Surface Mount Dip Switch Overview

DSPV SURFACE MOUNT DIP SWITCHES

Kingtek DSPV Surface Mount Series DIP Switches

DSPV SURFACE MOUNT SERIES FEATURES

All materials are UL 94V-0 grade, high temperature resistance plastic.
Twin contact design to ensure stable contact.
Gold-plated contacts to ensure low contact resistance, tin-plated terminals to prevent contamination during soldering.

DSPV SURFACE MOUNT SERIES DIMENSIONS

Positions		2	3	4	5	6	7	8	9	10	12
A	mm	6.08	8.72	11.90	14.44	16.98	19.52	22.06	24.60	27.14	32.22
A	inch	0.23	0.33	0.46	0.56	0.66	.076	.086	0.96	1.06	1.26

DSPV SURFACE MOUNT SERIES MATERIALS

Part Name	Material	Finish
Base	PPS UL94-V0	Black
Cover	PPS UL94-V0	Black
Actuator	Nylon UL94-V0	White
Moveable	Copper Alloy	Gold / Tin
Terminal Contact	Brass	Gold / Tin
Terminal	Brass	Gold / Tin

DSPV SURFACE MOUNT SERIES RATINGS

	Contact Rating
	Switching	: 25 mA at 24 VDC
	Non-Switching	: 100 mA at 50 VDC
	Contact Resistance
	Initial	: 50 mOhm Max
	After life	: 100 mOhm Max
	Insulation Resistance	: 1000 MOhm Min, 60 sec at 500 VDC
	Dielectric Strength	: 500 VAC for 60 sec
	Switch Capacitance	: 5 pF Max at 1 MHz
	Operation Temperature	: -30 to +85 deg C
	Storage Temperature	: -40 to +85 deg C

DSPV SURFACE MOUNT SERIES MECHANICAL & PROCESSING

	Operational Force	: 1000 gf Max
	Mechanical Life	: 3000 cycles
	Resistance to Soldering	: 250 +/- 5 deg C for 10 seconds

DSPV SURFACE MOUNT SERIES ENVIRONMENTAL TESTING

     Cold:
Switches under temperature at -40 +/- 2 deg C for 96 hours.

     Dry Heat:
Switches under temperature at 85 +/- 2 deg C for 96 hours.

     Humidity:
Per MIL-STD-202F, Method 103B, Test Condition B
There shall be no evidence of corrosion and the insulation resistance shall be no less than 100 megaohms.

     Vibration:
Per MIL-STD-202F, Method 204D, Test Condition A
There shall be no opening of closed contacts or closing of open contacts in excess of 10 microseconds.

     Shock:
Per MIL-STD-202F, Method 2213B, Test Condition A
There shall be no opening of closed contacts or closing of open contacts in excess of 10 microseconds.

     Thermal Shock:
Per MIL-STD-202F, Method 107G, Test Condition A
There shall be no evidence of physical damage or permanent change in electrical characteristics

     Salt-Spray:
Per MIL-STD-202F, Method 101D, Test Condition B
Under 35 +/- 2 deg C and 5 +/- 1% salt-water concentration for 48 +/- 1 hours.

DSPV SURFACE MOUNT SERIES PACKING SPECIFICATIONS

Kingtek DSPV IC Type Series DIP Switches

Package	Pole	2	3	4	5	6	7	8	9	10	12
Tube	Qty/Tube	100	66	50	40	33	28	25	22	20	16
Tube	Qty/Tube	83	58	42	35	30	26	23	20	18	15

Package	Pole	2	3	4	5	6	7	8	9	10	12
Reel	Qty/Reel	1,000	1,000	1,000	1,000	1,000	1,000	1,000	1,000	1,000	1,000

DSPV SURFACE MOUNT SERIES SPECIFICATION PDF